Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser designed for CAN buses. It's discreet and does not have LED indicators or key fobs, and is hidden in the wiring of the vehicle.
It also permits the user to disable the system temporarily through Transport Mode in the event of renting their vehicle. This guide will walk you through the installation of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle from hacking, key cloning and relay attacks. The system connects directly to your vehicle's ECU and is secured by a unique PIN code that you can choose. It is not detected by thieves using diagnostic scanners and other advanced methods. It isn't able to be disabled by cutting circuits.
The system is easy to use, however it's important to have an expert installation to ensure a clean and secure connection to your vehicle's ECU. An approved installer from Thatcham can assist in the installation and programming of your Ghost system. They can also suggest an alarm or tracking system to complete the security package for your vehicle.
First, the installer needs to disconnect your battery to prevent the possibility of airbag deployment and short circuits. Once the battery is disconnected, the installer can be able to work safely. Basic hand tools are helpful for securing connections with precision and a multimeter can be used to verify electrical values and ensure safety. Insulation tape and cable ties are also necessary for securing connections and keeping wiring neat. The Ghost Immobiliser user manual will give specific instructions that are tailored to your model.
It is essential to choose an area for grounding that is free of paint or debris during installation. The installer must be sure that the immobiliser's CAN H as well as CAN L wires are connected to the appropriate ports on the vehicle's ECU. Depending on the model, these wires may require soldering or plugged in. Using a high-quality connector is recommended to ensure a long-lasting and secure connection.
Transport Mode can be activated by the customer once the installation is complete. This allows the vehicle to be utilized by valet parking companies or mechanics without needing to know the pin code. The customer has to press the service icon on the dashboard five times within 2 seconds. The system will confirm this by showing five indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a great choice for anyone who frequently rents out their cars on platforms like Turo. Having an immobiliser can also reduce insurance premiums, since it significantly decreases the risk of theft.
Getting Started
You can't go far wrong with an autowatch immobiliser in order to guard your car from thieves. It protects your vehicle from being started even the theft or copies the key. This is due to its advanced technology, which is designed to prevent the engine from running without the correct PIN code is entered.
The device connects to the vehicle's bus network, CAN, allowing direct communication with the ECU. It uses existing buttons on the dashboard and wheel to create a unique sequence only you can identify which makes it impossible for someone else to start your vehicle. This is the best way to protect your pride and joy. It will not lose its value should you ever decide to sell it.
Installing a ghost ignition is an easy process, however, it is important to follow the steps carefully to avoid issues with electricity and system malfunctions. First, ghost immobiliser cost must locate a power supply of 12V and a solid grounding on the car's chassis. Then, you can begin connecting the wires to the immobiliser. Make sure to use high-quality connectors and soldering methods to ensure a solid connection. Make sure to shield the connections with heat shrink tubing, insulation tape or other materials to prevent short circuits of electricity.
Once ghost immobilisers are connected, you can connect the battery and start the engine to test if the immobiliser is working. Once everything is working properly, you can install it in a safe location beneath the dash or anywhere else in the vehicle. Make sure you hide it well to prevent thieves from getting into it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a high-quality deterrent to car burglars. It is impervious to hacking and key cloning and is not able to be disabled without the code. It is also simple to use and can be set into the service valet mode to ensure that your car isn't activated if you take it in for service or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's designed to prevent vehicle theft. It connects directly to the vehicle's CAN bus network and communicates with the ECU, making it a virtually undetectable addition to your vehicle. Contrary to other aftermarket systems which require the removal of circuit components, the Ghost Immobiliser doesn't interfere with your vehicle's factory settings.
The system is also unnoticeable by thieves using diagnostic scanning tools. This is because the system doesn't transmit and receive radio frequency signals, and it relies on the CAN data format to communicate with your ECU. Additionally, it doesn't require any modification to your vehicle's existing key fobs.
To make use of the Ghost Immobiliser simply switch on the ignition in your car and enter your sequence for disarming (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. After ghost immobiliser cost , you are able to start your vehicle and leave with peace of mind.
Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning while protecting its value. If you ever need to hand over your vehicle to valet parking or for service The Ghost Immobiliser will be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need to find an energy source that is constant (12V) and an earthing point. Be sure that they are well-insulated and safe to touch. Cable ties are also suggested for bundling and secure the wires. This will reduce the possibility of theft by potential thieves. Make sure you check the exact locations of these points to avoid committing a mistake, and mark them with a piece of tape or label. Examine every connection for signs that they are wearing out. Be sure to ensure that all connections are securely in place, and are properly protected. Also, don't forget test the Ghost Immobiliser after installation is complete. This will ensure that the unit is working correctly and that all connections and insulation are safe. Make sure to address any problems immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that is integrated into your vehicle's ECU to stop the engine from starting without authorization. Its cutting-edge technology safeguards your vehicle from hacking, key cloning, and other common tactics that thieves employ to steal vehicles. The Ghost also works in tandem with other alarm and tracking systems to provide the most complete protection for your vehicle. The Ghost's unparalleled features and secluded design make it a preferred choice for car lovers and security-conscious drivers too.
It is essential to follow the steps of installation to ensure the correct integration of the Ghost Immobiliser. The best place to start is to consult the wiring diagram for your vehicle that will serve as a guideline for locating and connecting the necessary wires. Then, you'll need to identify the power source as well as grounding points. Once you have located them, you will need to mark the points to make them easy to identify when installing. Finally, it's vital to use only the best tools and materials. Basic hand tools can help you make precise connections. A multimeter will verify electrical values, and also ensure security. Cable tie and insulation tape will keep all connections neat. Finally, a user manual will provide specific guidance specific to your Ghost model.
Before you begin installing, it's important to test the system by entering the PIN code, then starting the vehicle. This will ensure that the immobiliser works in the way it was intended, preventing unauthorized vehicle start-ups. This step should be done frequently as part of your regular inspections of your vehicle to ensure the system is always functioning properly.
After the installation is completed Once the installation is complete, you can drive your vehicle with confidence. The Ghost will safeguard your car from would-be car thieves. It will ensure that no one is able to escape with your car even if they don't have the correct PIN code. The Ghost can also be linked with a tracker approved by Thatcham to detect any attempt to steal or tamper that could lead to the location of your vehicle in the event of it being stolen.
The Ghost is compatible with a variety of vehicles, including those made by all major manufacturers. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to learn more about our service and installation options. We are a TASSA Registered installer This certification ensures that we follow strict guidelines and procedures for installing our products. This reassures customers, insurers and law enforcement officials that installations are done safely and correctly.